Table of Contents
Advertisement
FusionPower6000 3.0
User Manual (Not Against a Wall)
Signal Ports
Silk Screen
USB
DI/DO_1–DI/DO_5
DI_1–DI_19
PT1, PT2
AI/DI
COM1/AIDI_1,
COM2/AIDI_2
NTC1–3, NTC4–6,
NTC7–9, NTC10–
12
CAN1/12V,
CAN2/12V
WAN1, WAN2
FAN1–3, FAN4–6
Indicators
Table 2-12 Interface board indicators
Indicator
RUN
Issue 03 (2023-02-08)
Name
USB port
DI/DO port
DI port
Reserved (PT
port)
Reserved (AI/DI
port)
RJ45 port
NTC port (RJ45)
CAN port (RJ45)
Ethernet port
(RJ45)
Fan port
Color
Green
Copyright © Huawei Digital Power Technologies Co., Ltd.
Description
Supplies power to the PAD.
Provide five signal dry contact inputs/
outputs.
Provide 19 dry contact inputs. DI_12
can connect to a digital SPD.
Provide two ports for PT100
temperature sensors.
Provide two AI/DI ports.
Provide two AI/DI and RS485 ports;
can connect to a switch
communications module.
Connect to 12 NTC sensors. The NTC
sensors can detect temperatures
ranging from –20°C to +120°C.
Provide two CAN communications
ports, each supplying 12 V DC power.
Provide two WAN ports, each of which
supports 10 Mbit/s or 100 Mbit/s
adaptive communication.
Provide six ports for supplying DC
power to and controlling fans, and
support fan speed detection and
adjustment. The maximum power of
each fan is 100 W.
Name
Status
Running
Blinking
status
at long
indicator
intervals
Blinking
at short
intervals
2 Product Overview
Description
The program is running
properly (blinking at 0.5
Hz, on for 1s and then off
for 1s).
Communication with the
host has failed (blinking
at 4 Hz, on for 0.125s and
then off for 0.125s).
68
Advertisement
Table of Contents
