Table of Contents
Advertisement
FusionPower6000 3.0
User Manual (Not Against a Wall)
3.
Step 4 Move the transformer cabinet and then other cabinets to the installation position
in sequence.
● Move the transformer cabinet using a forklift with a minimum capacity of 6
● Move the equipment with caution. Any bumping or falling may damage the
Step 5 Adjust the cabinet position. Ensure that the deviation of the front, rear, left, and
right end faces of adjacent cabinets is less than or equal to 3 mm. If the levelness
of the support surface does not meet the requirement, add spacers to level the
cabinets and ensure that the height deviation of the cabinets is less than or equal
to 2 mm.
Issue 03 (2023-02-08)
Figure 4-7 Removing PC panels
(1) Plastic rivet
Reinstall the rear door panels.
NO TICE
tons.
equipment.
Copyright © Huawei Digital Power Technologies Co., Ltd.
4 Installation and Cable Connection
(2) Inner side of a rear door
panel
(3) PC panel
97
Advertisement
Table of Contents
