Adding A Compensation Cabinet - Huawei FusionPower6000 3.0 User Manual

FusionPower6000 3.0
User Manual (Not Against a Wall)
Step 2 Confirm the mounting relationship.
1.
2.
3.
4.
5.
Figure 6-5 Changing the mounting relationship
----End

6.6.2.3 Adding a Compensation Cabinet

Step 1 Add a compensation cabinet.
Issue 03 (2023-02-08)
– If the connection succeeds, click Confirm. The connected devices are
displayed in the Number of connected devices list.
– If the connection fails, check whether the device is properly connected to
the ECC800-Pro, whether the device and ECC800-Pro are running
properly, and whether the parameter settings are consistent with the
device parameters.
If an ATS is connected before the cable inlet and bus tie cabinet or the bus tie
cabinet, and the ATS is mounted under Power Distribution, the ATS
mounting is automatically switched to the first connected cabinet.
If the cable inlet and bus tie cabinet or the bus tie cabinet is connected before
the ATS, the ATS is preferentially mounted under the cable inlet and bus tie
cabinet or the bus tie cabinet.
If the cable inlet and bus tie cabinet or the bus tie cabinet is deleted due to
communication failure, the ATS mounting is automatically switched from the
cable inlet and bus tie cabinet or the bus tie cabinet to the remaining cabinet.
If both the cable inlet and bus tie cabinet and the bus tie cabinet are deleted
due to communication failure, the ATS is mounted under Power Distribution.
If the ATS mounting relationship is inconsistent with the actual situation,
choose Home > Modify Device and click the cabinet to which the ATS is to
be mounted. In the displayed dialog box, select ATS in cabinet and click
Finish.
Copyright © Huawei Digital Power Technologies Co., Ltd.
6 FAQ
204