Huawei FusionPower6000 3.0 User Manual page 186

FusionPower6000 3.0
User Manual (Not Against a Wall)
Step Operation
Power Setting the
Module system type
Settings and power
module
name
Basic Param Setting WiFi
Settings parameters
Setting the
time zone
and time
Setting
WAN_1
networking
parameters
Issue 03 (2023-02-08)
NO TE
● In the process, click Previous, Next, and Skip as required. If the Video Settings and
Access Management functions are not involved, you can click Next or Skip.
● To exit before the configuration is complete, click Finish to terminate the configuration
directly.
Parameter
System type
Power
module
name
Enable WiFi
WiFi SSID
WiFi
password
Local time
zone
Local date
Local time
IP
Subnet
mask
Default
gateway
Copyright © Huawei Digital Power Technologies Co., Ltd.
Setting
FusionPower6000
Set this parameter based on the site
plan.
Enable
Set this parameter based on the site
plan.
Set this parameter based on the site
plan.
Set this parameter to the time zone
of the site.
Set this parameter based on site
requirements.
Set this parameter based on site
requirements.
Set this parameter based on the site
plan.
Set this parameter based on the site
plan.
Set this parameter based on the site
plan.
5 Power-On Commissioning
Description
If the
system type
is changed,
the software
will restart
and you can
log in again
after 3
minutes.
-
You are
advised to
change your
password
periodically.
-
Click Obtain
Local Time
to
synchronize
the date and
time of the
ECC800-Pro
with the
date and
time on the
PC.
-
179