Table of Contents
Advertisement
FusionPower6000 3.0
User Manual (Not Against a Wall)
Step 3 (Optional) If you set S-ECO mode in bypass mode, manually start the UPS
inverter.
After the inverter is started, the UPS still supplies power through the bypass, and
the inverter is standby. When the bypass is abnormal, the UPS transfers to inverter
mode immediately. If the inverter is not started, the UPS stops supplying power
when the bypass is abnormal, and the system may power off.
Figure 6-11 S-ECO system status (VFI)
Figure 6-12 S-ECO system status (VFD)
Issue 03 (2023-02-08)
NO TE
If the S-ECO mode is set when the UPS works in inverter mode, the UPS transfers to the S-
ECO mode 4 minutes after the setting is complete and the conditions are met.
NO TICE
Copyright © Huawei Digital Power Technologies Co., Ltd.
6 FAQ
213
Advertisement
Table of Contents
