Installing Ups Power Modules - Huawei FusionPower6000 3.0 User Manual

FusionPower6000 3.0
User Manual (Not Against a Wall)
Figure 4-70 Installing a compensation module
----End

4.10 Installing UPS Power Modules

If power modules are delivered separately, install them onsite.
Step 1 Turn the ready switch of a power module to the unlocked state.
Step 2 Use a lifting trolley to move the power module to the reserved position in the
UPS.
The power module is removed from or inserted into the rack over a connector.
Gently insert the power module; otherwise, the connector may be deformed,
which results in poor contact.
Step 3 Secure the power module.
Step 4 Turn the ready switch of the power module to the locked state.
Issue 03 (2023-02-08)
NO TICE
NO TICE
Copyright © Huawei Digital Power Technologies Co., Ltd.
4 Installation and Cable Connection
146