18-1.Drawer In Position Detection - Minolta Di181 Service Manual

18-1. Drawer In Position Detection
When the 1st drawer is slid into the copier, it actuates the switch, informing the copier that
the drawer has been slid into position.
1st Drawer Set Switch S65
S65
When the 2nd drawer is slid into the copier, the light blocking plate blocks the Set Sensor.
The copier then knows that the drawer has been slid into position.
PC69
CONTROL SIGNAL
PWB-A PJ15A-11
2nd Drawer Set Sensor PC69
CONTROL SIGNAL
PWB-A PJ2A-2
M-51
1177M067AA
ON OFF
L H
1139M061AA
Blocked Unblocked WIRING DIAGRAM
L H
WIRING DIAGRAM
11-D
11-E