Table of Contents
Advertisement
4.3.4
CTX Documents.
A CTX document contains the complete backup of a Cortex RTR configuration on hard drive (with the
.CTX extension).
This is a low level description file without any MMI configuration information that is created by the SPS
software.
CTX documents are binary files and cannot be displayed or printed.
CTX documents are automatically saved every 10 seconds and at software exit.
The Signal Processing Software opens a default file during boot up sequence. This file is :
The icon
from the toolbar creates the following window to manage CTX documents
This window allows you to create, save or load up to 127 different configurations for the Cortex RTR allowing the
user to name each saved configuration for easy reuse. The Delete function allows the user to remove any unused
configuration.
Note:
« New », « Load », « Save » and « Delete » operations are enabled (i.e. not grayed out) only if both
buttons have been clicked
As the CTX document does not contain any information for MMI, it has to be refreshed by clicking on the
button.
Warning:
For a proper MMI update after a CTX document load, the
operation page (or any other tab) is in the foreground.
When changing configuration by using CTX document, it is recommended to set the
"Preferences/OK/Differ Management" to "Auto". With this configuration, when loading a CTX file, the
GUI will automatically update without displaying any differ.
© Safran Data Systems – IMP000074 e14r1
Radio Telemetry Receiver
Graphical User Interface Manual
D:\ZDS\Data\cortex\cortex-nt.ctx
(1
then
2
) and both passwords have been entered.
This document is the property of
It cannot be duplicated or distributed without expressed written consent.
Ref.
D130486
Is.Rev
03
Customer Ref.:
-
Date:
21/06/2021
1
2
icon should only be pushed when
Safran Data Systems
.
Page 18
Advertisement
Table of Contents
