Toolbar - Safran RTR-NeXt User Interface Manual

4.1.2

Toolbar.

See the « FILE – NEW » command.
See the « FILE – OPEN » command.
See the « FILE – SAVE » command.
See the « FILE – PRINT » command.
Displays the version of the RTR-MCS.
Copies the current configuration of the Cortex RTR into the Graphic Interface (command only
available if a connection has been set up to the Cortex RTR).
Applies the configuration of the MCS document to the Cortex RTR to which the MCS is connected
(command only available if a connection has been set up and if the configuration mode has been
activated).
Connects to the Cortex RTR (command only available if a connection has been closed)
Closes the connection to the Cortex RTR (command only available if a connection has been set up).
This tab is not activated.
Opens a window allowing management of TCP/IP connections (see following section).
Switch to local mode. No other MMI will be able to change configuration
Opens the CTX Document Management window
Opens the Remote Menu Selection window (not recommended)
Logging management
Warning: For a proper MMI update after a CTX document load, the
operation page (or any other tab) is in the foreground.
© Safran Data Systems – IMP000074 e14r1
Radio Telemetry Receiver
Graphical User Interface Manual
This document is the property of
It cannot be duplicated or distributed without expressed written consent.
Ref. D130486
Is.Rev 03
Customer Ref.: -
Date: 21/06/2021
button should only be pushed when
Safran Data Systems
.
Page 14