Zeroing Function - Safran RX-1 User Manual

7.3

Zeroing function.

Activating the zeroing function generates the following actions:

The receiver measures the noise levels at the inputs of the receiver channel 1 and 2.

The receiver uses this measure to balance RF gain impairment at the input of the Pre D combiner. This
action compensates the gain difference between channel 1 and channel 2 (LNAs, RF cable losses...) up
to 10dB.
Do not forget :
Before activating the zeroing function ,

Be sure that there are no carriers inside the intermediate frequency filter

Be sure that there is only noise

Be sure that the antenna points toward a clear sky
© Safran Data Systems – IMP000074 e14r1
RX-1 Compact Operational Receiver
User's Manual
This document is the property of
It cannot be duplicated or distributed without expressed written consent.
Ref. D104047
Is.Rev 08
Previous Ref.: -
Date: 21/06/2021
Zeroing activation by
clicking on this button
Safran Data Systems
.
Page 99