Infinitely Variable Change Of Numeric Data Value; Read-Out And Programming Of Indexed Parameters; How To Programme On The Numerical Local Control Panel - Danfoss FC 300 Programming Manual

How to Programme
2.1.14 Infinitely Variable Change of Numeric
Data Value
2 2
If the chosen parameter represents a numeric data value,
select a digit by means of the [
Change the selected digit infinitely variably by means of the
▲ ▼
[ ] [ ] navigation keys.
The chosen digit is indicated by the cursor. Place the cursor on
the digit you want to save and press [OK].
2.1.15 Value, Step-by-Step
Certain parameters can be changed step by step or infinitely
varying. This applies to par. 1-20 Motor Power [kW],
par. 1-22 Motor Voltage and par. 1-23 Motor Frequency.
The parameters are changed both as a group of numeric data
values and as numeric data values infinitely varying.
2.1.16 Read-out and Programming of
Indexed Parameters
Parameters are indexed when placed in a rolling stack.
Par. 15-30 Fault Log: Error Code to par. 15-32 Alarm Log: Time
contain a fault log which can be read out. Choose a parameter,
press [OK], and use the [
through the value log.
Use par. 3-10 Preset Reference as another example:
Choose the parameter, press [OK], and use the [
tion keys to scroll through the indexed values. To change the
parameter value, select the indexed value and press [OK].
Change the value by using the [
accept the new setting. Press [CANCEL] to abort. Press [Back]
to leave the parameter.
20
FC 300 Programming Guide
◀ ▶
] [ ] navigation keys.
▲ ▼
] [ ] navigation keys to scroll
▲ ▼
] [ ] naviga-
▲ ▼
] [ ] keys. Press [OK] to
MG.33.M9.02 - VLT
2.1.17 How to Programme on the Numerical
Local Control Panel
The following instructions are valid for the Numerical LCP (LCP
101).
The control panel is divided into four functional groups:
1. Numerical display.
2. Menu keys and indicator lights - changing parame-
ters and switching between display functions.
3. Navigation keys and indicator lights (LEDs).
4. Operation keys and indicator lights (LEDs).
Display line: Status messages displaying icons and numeric
value.
Indicator lights (LEDs):
•
Green LED/On: Indicates if control section is on.
•
Yellow LED/Wrn.: Indicates a warning.
•
Flashing red LED/Alarm: Indicates an alarm.
LCP keys
[Menu] Select one of the following modes:
•
Status
•
Quick Setup
•
Main Menu
®
is a registered Danfoss trademark