Danfoss FC 300 Programming Manual page 16

How to Programme
Operating variable:
Par. 16-00 Control Word
Par. 16-01 Reference [Unit]
2 2
Par. 16-02 Reference [%]
Par. 16-03 Status Word
Par. 16-05 Main Actual Value [%]
Par. 16-10 Power [kW]
Par. 16-11 Power [hp]
Par. 16-12 Motor Voltage
Par. 16-13 Frequency
Par. 16-14 Motor Current
Par. 16-16 Torque [Nm]
Par. 16-17 Speed [RPM]
Par. 16-18 Motor Thermal
Par. 16-20 Motor Angle
Par. 16-30 DC Link Voltage
Par. 16-32 Brake Energy /s
Par. 16-33 Brake Energy /2 min
Par. 16-34 Heatsink Temp.
Par. 16-35 Inverter Thermal
Par. 16-36 Inv. Nom. Current
Par. 16-37 Inv. Max. Current
Par. 16-38 SL Controller State
par. 16-39 Control Card Temp.
Par. 16-40 Logging Buffer Full
Par. 16-50 External Reference
Par. 16-51 Pulse Reference
Par. 16-52 Feedback [Unit]
Par. 16-53 Digi Pot Reference
Par. 16-60 Digital Input
Par. 16-61 Terminal 53 Switch Setting
Par. 16-62 Analog Input 53
Par. 16-63 Terminal 54 Switch Setting
Par. 16-64 Analog Input 54
par. 16-65 Analog Output 42 [mA]
Par. 16-66 Digital Output [bin]
Par. 16-67 Pulse Input #29 [Hz]
Par. 16-68 Freq. Input #33 [Hz]
Par. 16-69 Pulse Output #27 [Hz]
Par. 16-70 Pulse Output #29 [Hz]
Par. 16-71 Relay Output [bin]
Par. 16-72 Counter A
Par. 16-73 Counter B
Par. 16-80 Fieldbus CTW 1
Par. 16-82 Fieldbus REF 1
Par. 16-84 Comm. Option STW
Par. 16-85 FC Port CTW 1
Par. 16-86 FC Port REF 1
Par. 16-90 Alarm Word
Par. 16-92 Warning Word
Par. 16-94 Ext. Status Word
16
FC 300 Programming Guide
Status screen I:
Unit:
This read-out state is standard after start-up or initialization.
hex
Use [INFO] to obtain information about the measurement links
[unit]
to the displayed operating variables (1.1, 1.2, 1.3, 2 and 3).
%
See the operating variables shown in the screen in this illustra-
hex
tion.
%
[kW]
[HP]
[V]
[Hz]
[A]
Nm
[RPM]
%
V
kW
kW
Status screen II:
C
See the operating variables (1.1, 1.2, 1.3 and 2) shown in the
%
screen in this illustration.
A
In the example, Speed, Motor current, Motor power and
A
Frequency are selected as variables in the first and second.
C
[Unit]
bin
V
V
Status screen III:
[mA]
This state displays the event and action of the Smart Logic
[bin]
Control. For further information, see section Smart Logic
[Hz]
Control.
[Hz]
[Hz]
[Hz]
hex
hex
hex
hex
hex
®
MG.33.M9.02 - VLT is a registered Danfoss trademark