Danfoss FC 300 Programming Manual page 127

Parameter Descriptions
13-10 Comparator Operand
Array [6]
Option: Function:
Linked to hand/auto, while the LCP is in
Auto on mode.
[182] Start command Start command [182] High when there is an
active start command, and no stop
command.
[183] Drive stopped Drive stopped [183] A stop command ( Jog,
Stop, Qstop, Coast) is issued – and not from
the SLC itself.
[185] Drive in hand Drive in hand mode [185] High when the
mode frequency converter is in hand mode.
[186] Drive in auto Drive in auto mode [186] High when the
mode frequency converter is in auto mode.
[187] Start command
given
[190] Digital input
x30 2
[191] Digital input
x30 3
[192] Digital input
x30 4
[193] Digital input
x46 1
[194] Digital input
x46 2
[195] Digital input
x46 3
[196] Digital input
x46 4
[197] Digital input
x46 5
[198] Digital input
x46 6
[199] Digital input
x46 7
FC 300 Programming Guide
13-11 Comparator Operator
Array [6]
Option:
[0]
[1]
[2]
[5]
[6]
[7]
[8]
13-12 Comparator Value
Array [6]
Range:
Application
dependent
®
MG.33.M9.02 - VLT is a registered Danfoss trademark
Function:
Select the operator to be used in the compari-
son. This is an array parameter containing
comparator operators 0 to 5.
< Select < [0] for the result of the evaluation to be
TRUE, when the variable selected in
par. 13-10 Comparator Operand is smaller than
the fixed value in par. 13-12 Comparator Value.
The result will be FALSE, if the variable selected
in par. 13-10 Comparator Operand is greater
than the fixed value in par. 13-12 Comparator
Value.
≈ (equal) Select ≈ [1] for the result of the evaluation to be
*
TRUE, when the variable selected in
par. 13-10 Comparator Operand is approximately
equal to the fixed value in par. 13-12 Compara-
tor Value.
> Select > [2] for the inverse logic of option < [0].
TRUE
longer
than..
FALSE
longer
than..
TRUE
shorter
than..
FALSE
shorter
than..
[-100000.000 -
100000.000 N/A]
*
Function:
Enter the 'trigger level' for the
variable that is monitored by
this comparator. This is an
array parameter containing
comparator values 0 to 5.
127
3 3