Danfoss FC 300 Programming Manual page 30

Parameter Descriptions
0-25 My Personal Menu
Range:
Applica- [0 -
tion 9999 ]
depend-
3 3
ent
*
3.2.4 0-3* LCP Custom Readout
It is possible to customize the display elements for various
purposes: *Custom Readout. Value proportional to speed
(Linear, squared or cubed depending on unit selected in
par. 0-30 Custom Readout Unit) *Display Text. Text string
stored in a parameter.
Custom Readout
The calculated value to be displayed is based on settings in
par. 0-30 Custom Readout Unit, par. 0-31 Custom Readout Min
Value (linear only), par. 0-32 Custom Readout Max Value,
par. 4-13 Motor Speed High Limit [RPM], par. 4-14 Motor Speed
High Limit [Hz] and actual speed.
The relation will depend on the type of unit selected in
par. 0-30 Custom Readout Unit:
30
FC 300 Programming Guide
Function:
Define up to 50 parameters to appear in the
Q1 Personal Menu, accessible via the [Quick
Menu] key on the LCP. The parameters will
be displayed in the Q1 Personal Menu in the
order they are programmed into this array
parameter. Delete parameters by setting the
value to '0000'.
For example, this can be used to provide
quick, simple access to just one or up to 50
parameters which require changing on a
regular basis (e.g. for plant maintenance
reasons) or by an OEM to enable simple
commissioning of their equipment.
MG.33.M9.02 - VLT
Unit Type
Dimensionless
Speed
Flow, volume
Flow, mass
Velocity
Length
Temperature
Pressure
Power
0-30 Unit for User-defined Readout
Option: Function:
It is possible to program a value to be shown in the
display of the LCP. The value will have a linear,
squared or cubed relation to speed. This relation
will depend on the unit selected (see table above).
The actual calculated value can be read in
par. 16-09 Custom Readout, and/or shown in the
display be selecting Custom Readout [16-09] in
par. 0-20 Display Line 1.1 Small to par. 0-24 Display
Line 3 Large.
[0] None
*
[1] %
[5] PPM
[10] 1/min
[11] rpm
[12] Pulse/s
[20] l/s
[21] l/min
[22] l/h
[23] m3/s
[24] m3/min
[25] m3/h
[30] kg/s
[31] kg/min
[32] kg/h
[33] t/min
[34] t/h
[40] m/s
[41] m/min
[45] m
[60] °C
[70] mbar
[71] bar
[72] Pa
[73] kPa
[74] m WG
[80] kW
[120] GPM
[121] gal/s
[122] gal/min
[123] gal/h
[124] CFM
®
is a registered Danfoss trademark
Speed Relation
Linear
Quadratic
Cubic