Programming Menu - KEB COMBIVERT F5 Operation Manual

Programming Menu

3.6. Programming
Menu
56
The programming menu is where all manual parameter adjustments are
made and can be accessed at Home > Prog (F3).
The Parameter menu contains the following groups:
Complete parameter descriptions are listed in Section 6.
i
Not all parameters may be viewable and changeable, depending on the
password accessibility. Refer to Section 3.8.2 for additional information on
password access.
• Operator System (OS)
• Basic Setup (US)
• Inputs (LI)
• Motor Data (LM)
• Encoder Data (LE)
• Machine Data (LN)
• Speed Profile (LS)
• Tune Parameters (LL)
• Control Setting (LC)
• Timer Parameters (LT)
• Positioning Parameters (LP)
• Special Functions (LX)
• Configuration Handling (CH)
• Analog I/O (LA)
• Outputs (LO)
• Diagnostic Parameters (DG)
• Field Bus Configuration (FB)
• Terminal Slowdown (TS)