Carrier
Activation Method
Sprint
Activation Wizard
•
Verizon
•
Starting the Activation Wizard
Turning the Phone On and Off
70 Series Mobile Computer User's Manual
The activation process is slightly different for each CDMA carrier.
Your carrier sales contact and an Intermec representative can guide
you through the process.
After you supply the ESN to your carrier, they will respond with values
that you must enter using the Windows Mobile Activation Wizard (if
required). Some of the supported carriers do not require you to enter
any values. The following table shows the carriers, the correct
activation method to use, and the values that you need to activate your
phone.
Values Required for CDMA Phone
Dial *22899
Activation Wizard
After activation, the settings are permanently stored in the CDMA
module. Changing the OS or SSPB loads will not affect any of hte
settings or activation parameters stored in the WAN modem.
Depending on your wireless carrier, you may need to use the Windows
Mobile Activation Wizard to activate your phone.
To start the activation wizard:
1 Tap Start > Phone, or tap the Phone button on the Tile bar.
The phone application starts.
2 Tap Menu ( ) > Activation Wizard.
Before you can start using your phone, you need to enable it. You can
use Wireless Center to enable and disable your phone, as well
Bluetooth and Wi-Fi communications.
Chapter 3 — Using the Phone
Activation Values You Need
•
Master Subsidy Lock (MSL) or activation code
•
MDN
•
Mobile Station Identifier (MSID)
None. All parameters are automatically
transferred wirelessly.
49