Scanning Options For The Ck1; Unpacking The Ck1; Using The Ck1 For The First Time - Intermec CK1 User Manual

CK1 Features (continued)
Feature
I/O connector

Scanning Options for the CK1

Option
Laser scanner
Linear imager

Unpacking the CK1

When you remove the CK1 from its box, save the box and
shipping material in case you need to ship or store the CK1.
Check the contents of the box against the invoice for
completeness and contact your local Intermec service
representative if there is a problem.

Using the CK1 for the First Time

Before you can use the CK1 for the first time, you must perform
certain steps, such as charging and installing the battery. You can
find this information throughout this user's manual. However, if
you want to start using the CK1 immediately, see the CK1
Handheld Computer Quick Start Guide (P/N 073768) that ships
with the CK1.
CK1 Handheld Computer User's Manual
Chapter 1 — Learning About the CK1
Description
This 12-pin connector acts as a serial port, charge
input, and power output. When you use this
connector as a serial port, you can either connect
the CK1 directly to another serial device, such as
a printer or mobile phone using the CK1 to
printer cable or CK1 to mobile phone cable, or
you can insert the CK1 into a communications
dock. You connect the communications dock to a
PC, modem, or printer.
Description
Integrated standard-range laser scanner (650nM) with a
scan rate of 39 scans per second
Integrated linear imager with a scan rate of 200 scans per
second
3