Using The Reader For The First Time; Unpacking The Reader - Intermec JANUS 2020 User Manual

Hide thumbs Also See for JANUS 2020:

Table of Contents

JANUS 2020 Hand-Held Computer User's Manual (4MB)

Using the Reader for the First Time

Follow these steps to get your new JANUS 2020 reader up and running:

1. Unpack the reader, NiCad battery pack, companion disks, and

2. Charge the NiCad battery pack.

3. Install the charged NiCad battery pack.

4. Turn on the reader for the first time.

5. Set the time and date.

6. Verify that the reader is operating correctly.

These steps are described in detail in the next sections.

When you remove the reader from its box, save the box and shipping material

in case you need to ship or store the reader. Check the contents of the box

against the invoice for completeness and contact your Intermec representative

if there is a problem.

A set of companion disks are included in the box with the reader. These disks

contain software you can use on the reader. Look on the Boot Utilities

companion disk 1 for a README.DOC file. This file may contain information

about the reader that was not available when this manual was published. You

can view or print this file with any text editor.

documentation.

Worldwide Sales

Manual Supplement

JANUS Bridge Battery

Information Sheet

companion disks