Removing 3.5-Inch Hdd Modules - Fujitsu PRIMERGY TX1330 M4 Upgrade And Maintenance Manual

Hard disk drive (HDD) / solid state disk (SSD)
▶ When using a RAID array, add the additional HDD to the RAID array.
Configuring the RAID array, refer to the documentation of the RAID
controller, used in your configuration, see
on page
Concluding steps
▶ If applicable,
"Reassembling" on page
Please see your controller manual to configure the installed HDD.
7.4.4

Removing 3.5-inch HDD modules

Customer Replaceable
Unit (CRU)
Tools: Tool-less
Preliminary steps
▶ If the HDD module to be removed is combined into a RAID array, please
proceed as follows:
188
28.
Upgrade and Maintenance Manual
"Documentation overview"
66.
Hardware: 5 minutes
TX1330 M4