Removing 3.5-Inch Hdd Modules - Fujitsu PRIMERGY RX2540 M6 Upgrade And Maintenance Manual

Hard disk drive (HDD) / solid state disk (SSD)
▶ When using a RAID array, add the additional HDD to the RAID array.
Configuring the RAID array, refer to the documentation of the RAID
controller, used in your configuration, see
on page
Concluding steps
▶ If applicable,
"Installing the front cover with lock" on page
7.4.3

Removing 3.5-inch HDD modules

Customer Replaceable
Unit (CRU)
Tools:
tool-less
Preliminary steps
▶ If applicable,
"Removing the front cover with lock" on page
▶ If the HDD module to be removed is combined into a RAID array, please
proceed as follows:
148
30.
Upgrade and Maintenance Manual
"Documentation overview"
69.
Hardware: 5 minutes
52.
RX2540 M6