Concluding Steps; Replacing The Hdd Backplane On The 4X 3.5-Inch Hdd Extension Box; Preliminary Steps; Removing The Defective Hdd Backplane - Fujitsu PRIMERGY RX2560 M2 Upgrade And Maintenance Manual

7.4.6.4

Concluding steps

"Installing the system fan holder" on page 94
Ê
"Installing the system air duct" on page 92
Ê
"Reassembling" on page 74
Ê
"Connecting the power cord" on page 87
Ê
"Resuming BitLocker functionality" on page 136
Ê
"Switching on the server" on page 90
Ê
7.4.7 Replacing the HDD backplane on the 4x 3.5-inch
HDD extension box
Upgrade and Repair Unit
(URU)
Tools: Phillips PH2 / (+) No. 2 screw driver
7.4.7.1

Preliminary steps

"Shutting down the server" on page 58
Ê
"Disconnecting the power cord" on page 59
Ê
Ê Remove all HDD modules from the HDD extension box as described in
section "Removing 3.5-inch HDD modules" on page
"Getting access to the component" on page 61
Ê
"Removing the system air duct" on page 91
Ê
"Removing the system fan holder" on page 93
Ê
7.4.7.2

Removing the defective HDD backplane

Ê Unlock and pull the 4x 3.5-inch HDD extension box out of its installation bays
as described in section
page 251.
TX2560 M2 / RX2560 M2
Hard disk drive (HDD) / solid state drive (SSD)
"Removing the 4x 3.5-inch HDD extension box" on
Upgrade and Maintenance Manual
Hardware: 10 minutes
220.
253