Concluding Steps; Replacing The 4X 2.5-Inch Hdd Sas Backplane; Preliminary Steps - Fujitsu PRIMERGY RX300 S8 Upgrade And Maintenance Manual

Hard disk drives / solid state drives
7.4.1.4

Concluding steps

"Installing the fan box" on page 164
Ê
"Reassembling" on page 63
Ê
Ê Reinstall all HDD / SSD modules to their original drive bays as described in
section "Installing 3.5-inch HDD modules" on page
"Connecting the server to the power source" on page 69
Ê
"Switching on the server" on page 71
Ê
"Enabling BitLocker functionality" on page 95
Ê
7.4.2

Replacing the 4x 2.5-inch HDD SAS backplane

Field Replaceable Unit
(FRU)
Tools: Phillips PH2 / (+) No. 2 screw driver
7.4.2.1

Preliminary steps

"Locating the defective server" on page 51
Ê
"Disabling BitLocker functionality" on page 73
Ê
"Shutting down the server" on page 54
Ê
"Disconnecting power cords" on page 54
Ê
Ê Remove all HDD / SSD modules from the server as described in section
"Removing 2.5-inch HDD / SSD modules" on page
V
CAUTION!
Ensure that all hard disk drives are uniquely identified so that you can
reinsert them into their original bays after replacing the HDD
backplane.
"Getting access to the component" on page 57
Ê
"Removing the front cover" on page 443
Ê
"Removing the fan box" on page 162
Ê
148 Upgrade and Maintenance Manual
124.
Hardware: 10 minutes
138.
RX300 S8