Installing The Test Set In A System Rack - Agilent Technologies 8511B Operating And Service Manual

Installation

Installing the Test Set in a System Rack

Installing the Test Set in a System Rack
The recommended system rack is the Agilent 85043C. Instructions for
rack-mounting the 8511B test set in a system configuration with the
8510 are provided in the "Installation" chapter of the Agilent 8510 On-Site
Service Manual and in the Agilent 85043C System Rack Manual (part
number 85043-90022).
To install the flanges to rack mount the instrument (with or without handles)
in a standard 19 inch rack, refer to Figure 3-1 on page 3-4.
Agilent 8511B Test Set Operating and Service Manual 3-3