Table of Contents
Advertisement
4
Sample Gas Handling
Installing Sample Inlets
Installing Sample Inlets
Each Agilent 990 Micro GC can be outfitted with two sample inlets for up to two types of sample.
Each hexagonal sample inlet mainfold has one inlet port and four output ports.
•
Front Injection- The external tubing for sample is connected directly from the front of the GC
without going through accessories. The inlet port is at center of the manifold.
Figure 14.
Installing and configuring a sample inlet manifold
There are many configurations for inlet tubing. The following steps outline the process of
installing the sample inlet manifold with one channel. See the section
configurations
1 Unscrew and remove the Torx T-10 screw at the top of the front cover, and remove the front
cover.
44
Sample inlet manifold
on page 46 for more information.
Sample inlet
Agilent 990 Micro GC User Manual
Advertisement
Table of Contents
