The Command Line Interface
After following the complete process (above) once, you can download a file of the same name
(as long as all the other parameters are the same), with the following command:
[Device-Name]> download *
Backup your AP Configuration File to a TFTP Server
First start your TFTP program. It must be running and configured to transmit and receive.
[Device-Name]> upload <TFTP Server IP address> <tftpfilename (such as "config.sys")>
config
[Device-Name]> show tftp (to ensure the filename, file type, and the IP address are correct)
After setting the TFTP parameters, you can back up your current file (as long as all the other
parameters are the same), with the following command:
[Device-Name]> upload *
TX Power Control Commands
The TX Power Control feature lets you configure the transmit power level of the card in the AP
at one of four levels:
100% of the maximum transmit power level of the card
•
50%
•
25%
•
12.5%
•
Perform the following commands to enable TX Power Control and set the transmit power level:
[Device-Name]> set txpowercontrol enable
[Device-Name]> set wif <interface number> currenttxpowerlevel <value>
Allowed values are: 1 (100%), 2 (50%), 3 (25%), 4 (12.5%)
276 Avaya Wireless AP-7 User Guide