Table of Contents
Advertisement
Figure 9: Scan Tool Change Screen
c. In the IP Address Type field, select Static.
d. In the IP Address field, enter a static IP Address for the AP. You must assign the unit a
unique address that is valid on your IP subnet. Contact your network administrator if you
need assistance selecting an IP address for the unit.
e. In the Subnet Mask field, enter your network's Subnet Mask.
f. In the Gateway IP Address field, enter your network's Gateway IP Address.
g. In the Read/Write Password field, enter the SNMP Read/Write password (for new units,
the default SNMP Read/Write password is "public").
Note:
The TFTP Server IP Address and Image File Name fields are only available if
Note:
ScanTool detects that the AP does not have a valid software image installed. See
Client Connection Problems
h. Click OK to save your changes.
Result: The Access Point will reboot automatically and any changes you made will take
effect.
i. When prompted, click OK a second time to return to the Scan List screen.
on page 190.
Initialization
Issue 1 September 2004
31
Advertisement
Table of Contents
