Station Statistics
This tab displays information on wireless clients attached to the AP and on Wireless Distribution
System links.
Enabling and Viewing Station Statistics
To enable the monitoring of Stations Statistics, use the following procedure:
1. Click on the Monitor tab on the left on the web page.
2. Click on the Station Statistics tab on the Monitor screen.
3. Enable the Monitoring Station Statistics feature (Station Statistics are disabled by default)
by checking Enable Monitoring Station Statistics and click OK.
You do not need to reboot the AP for the changes to take effect. If clients are connected to the
device or WDS links are configured for the device, the statistics will now be shown on the
screen.
Station Statistics
Issue 1 September 2004
167