Configuring Hardware Configuration Reset - Avaya AP-7 User Manual

Performing Advanced Configuration

Configuring Hardware Configuration Reset

Perform the following procedure to configure Hardware Configuration Reset and to set the
Configuration Reset Password.
1. Click Configure > Management > CHRD. See
Figure 37: Hardware Configuration Reset
2. Select (enable) or clear (disable) the Enable Hardware Configuration Reset check box.
3. Change the default Configuration Reset Password in the Configuration Reset Password
and Confirm fields.
Note:
It is important to safely store the configuration reset password. If you forget the
Note:
configuration reset password, you will be unable to reset the AP to factory default
configuration if the AP becomes inaccessible and the hardware configuration
reset functionality is disable.
Resetting the AP Configuration when Hardware Configuration Reset is
Disabled
If hardware configuration reset is disabled, you are prompted by a configuration reset option to
reset the AP to factory defaults during boot up from the serial interface. When you press a key
sequence (ctrl-R), you are prompted to enter a configuration reset password before the
configuration is reset.
96 Avaya Wireless AP-7 User Guide
Figure 37.