Avaya AP-7 User Manual page 292

The Command Line Interface
Table 110: 802.11b/g Parameters
Name
Transmit Rate
Physical Layer
Type
SuperMode
288 Avaya Wireless AP-7 User Guide
Type Values
Integer32 For 802.11b-only mode:
0 (auto fallback - default)
1 Mbits/sec
2 Mbits/sec
5.5 Mbits/sec
11 Mbits/sec
For 802.11g-only mode:
0 (auto fallback - default)
6 Mbits/sec
9 Mbits/sec
12 Mbits/sec
18 Mbits/sec
24 Mbits/sec
36 Mbits/sec
48 Mbits/sec
54 Mbits/sec
For 802.11bg modes:
0 (auto fallback - default)
1 Mbits/sec
2 Mbits/sec
5.5 Mbits/sec
11 Mbits/sec
6 Mbits/sec
9 Mbits/sec
12 Mbits/sec
18 Mbits/sec
24 Mbits/sec
36 Mbits/sec
48 Mbits/sec
54 Mbits/sec
Integer ERP (Extended Rate
Protocol)
Integer enable
disable (default)
Access CLI Parameter
RW txrate
R phytype
RW supermode
3 of 4