802.11A Wireless Interface Commands; 802.11A Parameters - Avaya AP-7 User Manual

The Command Line Interface

802.11a Wireless Interface Commands

The wireless interface group parameter is wif. For Single-radio APs, the wireless interface uses
table index 3. Wireless Interface A uses table index 3.
See Interface Configuration

802.11a Parameters

Table 107: 802.11a Parameters
Name
Wireless Interfaces
Table Index
Network Name
(SSID)
Auto Channel
1
Select (ACS)
DTIM Period
RTS/CTS Medium
Reservation
MAC Address
Closed System
Wireless Service
2
Status
Supported
Frequency
Channels
Transmit Power
Level
278 Avaya Wireless AP-7 User Guide
on page 62 for information on these parameters.
Type Values
Group N/A
Integer 3
DisplayString 2 – 32 characters
My Wireless Network
(default)
Integer enable (default)
disable
Integer 1 – 255
1 = default
Integer 0 – 2347
Default is 2347 (off)
PhyAddress 12 hex digits
Integer enable
disable (default)
Integer 1 = resume
2= shutdown
Octet String Depends on Regulatory
Domain
Integer 1=100%
2=50%
3=25%
4=12.5%
Access CLI Parameter
R wif
R index
RW netname
RW autochannel
RW dtimperiod
RW medres
R macaddr
RW closedsys
RW wssstatus
R suppchannels
RW currenttxpowerlevel
1 of 2