Telnet Commands; Telnet Parameters - Avaya AP-7 User Manual

Figure 92: Result of "show system" CLI Command
Enable 802.11d Support and Set the Country Code
Use the following command to enable 802.11d support for additional regulatory domains and
set the country code:
[Device-Name]> set sys 11d enable country <country code>

Telnet Commands

Telnet Parameters

Table 102: Telnet Parameters
Name
Telnet
Telnet Management
Interface Bitmask
Type Values
Group N/A
Interface 0 or 2 - no interfaces
Bitmask (disable)
1 or 3 - Ethernet
4 or 6 - Wireless
5 or 7 - all interfaces
(default is 7)
Telnet Commands
Access CLI Parameter
R telnet
RW telifbitmask
Issue 1 September 2004
1 of 2
273