Table of Contents
Advertisement
Performing Advanced Configuration
Table 6: DHCP Server Parameters
Parameter
Secondary DNS IP
Address
Number of IP Pool Table
Entries
IP Pool Table Entry
58 Avaya Wireless AP-7 User Guide
Description
The AP will assign the specified address to its DHCP clients.
This is a read-only field that reports the number of IP address
pools currently configured.
This entry specifies a range of IP addresses that the AP can
assign to its wireless clients. Click Add to create a new entry.
Click Edit to change an existing entry. Each entry contains the
following field:
Start IP Address
l
End IP Address
l
Default Lease Time (optional): The default time value for
l
clients to retain the assigned IP address. DHCP
automatically renews IP Addresses without client
notification. This parameter supports a range between 0
and 86400 seconds. The default is 86400 seconds.
Maximum Lease Time (optional): The maximum time
l
value for clients to retain the assigned IP address. DHCP
automatically renews IP Addresses without client
notification. This parameter supports a range between 0
and 86400 seconds. The default is 86400 seconds.
Comment (optional)
l
Status: IP Pools are enabled upon entry in the table. You
l
can also disable or delete entries by changing this field's
value.
Note:
You must reboot the Access Point before
Note:
changes to any of these DHCP server
parameters take effect.
2 of 2
Advertisement
Table of Contents
