Rogue Scan Commands; Rogue Scan Configuration Table; Syntax Examples - Avaya AP-7 User Manual

The Command Line Interface

Rogue Scan Commands

The Rogue Scan Configuration Table allows you to enable or disable Rogue Scan and
configure the scanning parameters.

Rogue Scan Configuration Table

Table 83: Rogue Scan Configuration Table
Name
Rogue Scan Configuration Table
Rogue Scan Mode
Rogue Scan Cycle Time
Rogue Scan Configuration Table
Index
Rogue Scan Status

Syntax Examples

Perform the following command to enable or disable Rogue Scan on a wireless interface and
configure the scanning parameters.
The cycletime parameter is only configured for background scanning mode.
[Device-Name]> set rscantbl <3, 4> mode <1 for background scanning, 2 for continuous
scanning> cycletime <cycletime from 1-1440 minutes> status <enable, disable>
Note:
Rogue Scan cannot be enabled on a wireless interface when the Wireless
Note:
Service Status on that interface is shutdown. First, resume service on the
wireless interface.
252 Avaya Wireless AP-7 User Guide
Type Values
Table N/A
Integer Bkscan (1)
Contscan (2)
Integer 1-1440
Integer 3 or 4
Integer Enable
Disable
Access CLI Parameter
R rscantbl
RW mode
RW cycletime
RW index
RW status