Table of Contents
Advertisement
Performing Advanced Configuration
Figure 48: VLAN Configuration for Security and RADIUS Profiles
3. Enter a unique Network Name (SSID), between 2 and 32 characters. This parameter is
mandatory.
4. Enter a unique VLAN ID. This parameter is mandatory.
You must specify a unique VLAN ID for each SSID on the interface. A VLAN ID is a
l
number from -1 to 4094. A value of -1 means that an entry is untagged.
You can set the VLAN ID to -1 or untagged if you do not want clients that are using a
l
specific SSID to be members of a VLAN workgroup. Only one untagged VLAN ID is
allowed per interface.
The VLAN ID must match an ID used by your network; contact your network
l
administrator if you need assistance defining the VLAN IDs.
5. Enable or disable the VLAN using the Status drop-down menu.
6. Enable or disable the SSID Authorization status from the drop-down menu. SSID
Authorization is the RADIUS based authorization of the SSID for a particular client. The
authorized SSIDs are sent as the tunnel attributes.
7. Enable or disable RADIUS accounting on the VLAN/SSID under the Accounting Status
drop-down menu.
8. Enable or disable RADIUS MAC authentication status on the VLAN/SSID under the
RADIUS Authentication Status drop-down menu.
140 Avaya Wireless AP-7 User Guide
Advertisement
Table of Contents
