Configure Qos Policies - Avaya AP-7 User Manual

Configure QoS Policies

The QoS group manages the QoS policies:
Table 114: QoS Policy Parameters
Name
QoS Group
QoS Policy Table
Table Primary Index
Table Secondary Index
Policy Name
Policy Type
Priority Mapping Index
Apply QoS Marking
Table Row Status
Note:
A priority mapping needs to be specified for a QoS Policy. The priority mapping
Note:
depends on the type of policy configured. For Layer 2 policy types (inbound or
outbound) a mapping index from the 802.1p to 802.1D table should be specified.
For Layer 3 policy types (inbound or outbound) a mapping index from the IP
DSCP to 802.1D table should be specified. The mapping index, in both cases,
depends on the number of mappings configured by the user. For SpectraLink
policy type a mapping is not required.
Type Values
Group N/A
Table N/A
Integer N/A
Integer N/A
Display String 0 - 32 characters
Integer inlayer2,
inlayer3,
outlayer2,
outlayer3,
spectralink
Integer See Note.
Object Status enable
disable
Row Status enable
disable
delete
WME/QoS Commands
Access CLI Parameter
N/A qos
N/A qospolicytbl
R index
R secindex
RW policyname
RW type
RW mapindex
RW markstatus
RW status
Issue 1 September 2004 293