Ip Access Table Configuration - Avaya AP-7 User Manual

Table 11: System Passwords
Type
Telnet (CLI) Password
HTTP (Web) Password
Note:
The default SNMPv3 username is administrator, with SHA authentication, and
Note:
DES privacy protocol.
Note:
For security purposes Avaya recommends changing ALL PASSWORDS from the
Note:
default "public" immediately, to restrict access to your network devices to
authorized personnel. If you lose or forget your password settings, you can
always perform the

IP Access Table Configuration

The Management IP Access table limits in-band management access to the IP addresses or
range of IP addresses specified in the table. This feature applies to all management services
(SNMP, HTTP, and CLI) except for CLI management over the serial port.
Description
The password for the CLI interface (via serial or Telnet).
Enter a password in both the Password field and the
Confirm field. The default password is "public".
The password for the Web browser HTTP interface. Enter a
password in both the Password field and the Confirm field.
The default password is "public".
Reset to Factory Default Procedure
Management Configuration
on page 193.
Issue 1 September 2004
2 of 2
81