Operational Mode; Tx Power Control; Autochannel Select (Acs); Enable/Disable Closed System - Avaya AP-3 User Manual

Operational Mode

[Device-Name]> set wif <index> mode <value> (see
Table 105: WIF Operational Modes
Mode
1
2
3
4
5

TX Power Control

The TX Power Control feature lets the user configure the transmit power level of the card in the
AP at one of four levels:
100% of the maximum transmit power level of the card
●
50%
●
25%
●
12.5%
●
Perform the following commands to enable TX Power Control and set the transmit power level:
[Device-Name]> set txpowercontrol enable
[Device-Name]> set wif <interface number> currenttxpowerlevel <value>
Allowed values are: 1 (100%), 2 (50%), 3 (25%), 4 (12.5%)

Autochannel Select (ACS)

ACS is enabled by default. Reboot after disabling or enabling ACS.
[Device-Name]> set wif <index> autochannel <enable/disable>
[Device-Name]> reboot 0

Enable/Disable Closed System

[Device-Name]> set wif <index> closedsys <enable/disable>
802.11a Wireless Interface Commands
Table 105.)
Operational Mode
dot11b-only
dot11g-only
dot11bg
dot11a-only
dot11g-wifi
Issue 1 October 2004 289