Static Mac Filter Examples - Avaya AP-7 User Manual

Performing Advanced Configuration
Configuring Static MAC Filter Entries
To create an entry, click Add and enter the appropriate MAC addresses and Masks to setup a
filter. The entry is enabled automatically when saved. See
To edit an entry, click Edit.
To disable or remove an entry, click Edit and change the Status field from Enable to Disable or
Delete.
Figure 38: Static MAC Configuration Screen

Static MAC Filter Examples

Consider a network that contains a wired server and three wireless clients. The MAC address
for each unit is as follows:
Wired Server: 00:40:F4:1C:DB:6A
•
Wireless Client 1: 00:02:2D:51:94:E4
•
Wireless Client 2: 00:02:2D:51:32:12
•
Wireless Client 3: 00:20:A6:12:4E:38
•
Prevent Two Specific Devices from Communicating
Configure the following settings to prevent the Wired Server and Wireless Client 1 from
communicating:
Wired MAC Address: 00:40:F4:1C:DB:6A
•
100 Avaya Wireless AP-7 User Guide
Figure 38.