Performing Advanced Configuration
Figure 35: DHCP Options: Scope Screen — Setting the Boot Server Host Name
4. Add the Boot Server Hostname and Boot Filename parameters to the Active Options list.
5. Set the value of the Boot Server Hostname Parameter to the hostname or IP Address of the
TFTP server. For example: 11.0.0.7.
6. Set the value of the Bootfile Name parameter to the Configuration filename. For example:
AP-Config. See
Figure 36: DHCP Options: Scope Screen — Setting the Bootfile Name
7. If using Syslog, set the Log server IP address (option 7, Log Servers).
94 Avaya Wireless AP-7 User Guide
Figure
36.