Update Ap By Using Http - Avaya AP-7 User Manual

Update AP by Using HTTP

Use the Update AP via HTTP tab to download Configuration, AP Image, Bootloader files, and
Certificate and Private Key files to the AP.
1. Once on the Update AP screen, click on the via HTTP tab. See
The Update AP via HTTP tab shows version information and allows you to enter HTTP
information as described in the following steps.
Figure 70: Update AP via HTTP Command Screen
2. Select the File Type that needs to be updated from the drop-down box. Choices include:
Image for the AP Image (executable program).
l
Config for configuration information, such as System Name, Contact Name, and so on.
l
SSL Certificate: the digital certificate for authentication in SSL communications.
l
SSL Private Key: the private key for encryption in SSL communications.
l
Upgrade Bsp/Bl for the Bootloader software.
l
CLI Batch File: a CLI Batch file that contains CLI commands to configure the AP. This
l
file will be executed by the AP immediately after being uploaded. See
Files on page 297 for more information.
Update AP by Using HTTP
Figure 70.
Using CLI Batch
Issue 1 September 2004 177