Dhcp Server Commands; Dhcp Server Parameters - Avaya AP-7 User Manual

DHCP Server Commands

! CAUTION:
Before enabling DHCP server on the AP, confirm that the IP address pools you
CAUTION:
have configured are valid addresses on the network and do not overlap the
addresses assigned by any other DHCP server on the network. Enabling this
feature with incorrect address pools will cause problems on your network.

DHCP Server Parameters

Table 56: DHCP Server Parameters
Name
DHCP Server
DHCP Server
Status
Gateway IP
Address
Primary DNS IP
Address
Secondary DNS
IP Address
Number of IP
Pool Table
Entries
Note:
You must have at least one entry in the DHCP Server IP Address Pool Table
Note:
before you can set the DHCP Server Status (dhcpstatus) to Enable.
Type Values
Group N/A
Integer enable (1)
(default)
disable (2)
delete (3)
IpAddress User Defined
IpAddress User Defined
IpAddress User Defined
Integer32 N/A
DHCP Server Commands
Access CLI Parameter
R dhcp
RW dhcpstatus
RW dhcpgw
RW dhcppridnsipaddr
RW dhcpsecdnsipaddr
R dhcpippooltblent
Issue 1 September 2004 227