Chapter 4: Performing Advanced Configuration
Chapter Contents
Configuring the AP Using the HTTP/HTTPS Interface
•
System Configuration
•
such as system name.
Network Configuration
•
DHCP server, DHCP Relay Agent, DHCP Relay Servers, and Link Integrity.
Interface Configuration
•
- Configure the Access Point's interfaces: Wireless and Ethernet.
- Configure a WDS Configuration.
Management Configuration
•
- Configure the Access Point's management Passwords, IP Access Table, and Services
such as configuring secure or restricted access to the AP via SNMPv3, HTTPS, or CLI.
- Configure Secure Management, SSL, Secure Shell (SSH), and RADIUS Based Access
Management.
- Set up Automatic Configuration for Static IP.
Filtering Configuration
•
Static MAC Address filters, Advanced filters, and Port filters.
Alarm Configuration
•
Groups, the Alarm Host Table, and the Syslog features.
Bridge Configuration
•
Protocol, Storm Threshold protection, Intra BSS traffic, and Packet Forwarding.
RADIUS Configuration
•
as RADIUS Access Control and Accounting.
Security Configuration
•
- Configure security features such as MAC Access Control, WPA, WEP Encryption, and
802.1x.
- Configure Wireless Multimedia Extensions (WME)/Quality of Service (QoS) and define
the Scan Cycle Time.
on page 51: Describes how to configure specific system information
on page
53:
Describes how to configure IP settings, DNS client,
on page 62: Describes how to:
on page 80: Describes how to:
on page
97:
Describes how to configure Ethernet Protocol filters,
on page
104:
Describes how to configure the Alarm (SNMP Trap)
on page
116:
Describes how to configure the Spanning Tree
on page 119: Describes how to configure RADIUS features such
on page 129: Describes how to:
on page 48
Issue 1 September 2004
47