Table of Contents
Advertisement
The Command Line Interface
Enable, Disable, or Delete a table entry or row
The following example shows how to manage the second entry in a table.
Table 50: Example: Enable, Disable, or Delete Table Entry
Syntax:
Example:
Note:
You may need to enable a disabled table entry before you can change the entry's
Note:
elements.
show
Displays the value of the specified parameter, or displays all parameter values of a specified
group (parameter table). Groups contain Parameters and Tables. Tables contain parameters for
a series of similar entities.
To see a definition and syntax example, type only show and then press the Enter key. To see a
list of available parameters, enter a question mark (?) after show (example: show ?).
Syntax
[Device-Name]> show <parameter>
[Device-Name]> show <group>
[Device-Name]> show <table>
Examples
[Device-Name]> show ipaddr
[Device-Name]> show network
[Device-Name]> show mgmtipaccesstbl
222 Avaya Wireless AP-7 User Guide
[Device-Name]> set <Table> index status <enable, disable, delete>
[Device-Name]> set <Table> index status <1=enable, 2=disable,
3=delete>
[Device-Name]> set mgmtipaccesstbl 2 status enable
[Device-Name]> set mgmtipaccesstbl 2 status disable
[Device-Name]> set mgmtipaccesstbl 2 status delete
[Device-Name]> set mgmtipaccesstbl 2 status 2
Advertisement
Table of Contents
