Show Group Parameters
To view all elements of a group or table:
Table 51: Example: Show Group Parameters
Syntax:
Example:
Result:
Figure 88: Results of "show network" and "show ip" CLI Commands
Show Table Parameters
To view a single parameter:
Table 52: Example: Show A Single Table Parameter
Syntax:
Example:
Result:
[Device-Name]> show <group name>
[Device-Name]> show network
The CLI displays network group parameters. Note show network and show ip
return the same data.
[Device-Name]> show <parameter name>
[Device-Name]> show ipaddr
Displays the Access Point IP address.
CLI Commands
Issue 1 September 2004
223