Table of Contents
Advertisement
Table 9: Wireless Interface Parameters
Parameter
Physical Interface Type
MAC Address
Regulatory Domain
Network Name (SSID)
Description
Depending on the Operational Mode, this field reports:
Operational Mode
For 802.11b mode only
For 802.11g mode
For 802.11b/g mode
For 802.11a mode
Note:
OFDM stands for Orthogonal Frequency Division
Note:
Multiplexing; this is the name for the radio
technology used by 802.11a devices. DSSS stands
for Direct Sequence Spread Spectrum; this is the
name for the radio technology used by 802.11b
devices.
This is a read-only field that displays the unique MAC (Media
Access Control) address for the Access Point's wireless interface.
The MAC address is assigned at the factory.
Reports the regulatory domain for which the AP is certified. Not all
features or channels are available in all countries. The available
regulatory domains include:
FCC - U.S./Canada, Mexico, and Australia
l
ETSI - Europe, including the United Kingdom
l
MKK - Japan
l
IL - Israel
l
SG: Singapore
l
ASIA: China and South Korea
l
TW: Taiwan and Hong Kong
l
Enter a Network Name (between 2 and 32 characters long) for the
primary wireless network. You must configure each wireless client
using this network to use this name as well. Additional SSIDs and
VLANs may be configured under Configure > SSID/VLAN/
Security. Up to 16 SSID/VLAN pairs may be configured per
wireless interface.
Interface Configuration
Physical Interface Type Reported
802.11b (CCK/DSSS 2.4 GHz)
802.11g (OFDM/DSSS 2.4 GHz)
802.11b/g (ERP-CCK/DSSS/OFDM 2.4 GHz)
802.11a (OFDM 5 GHz).
Issue 1 September 2004
1 of 3
69
Advertisement
Table of Contents
