Table of Contents
Advertisement
Getting Started
Wall Mount Installation
Perform the following steps to wall mount the Dual Band REA:
1. Detach the Antenna Body from the Main Base.
2. Press the Base Top upward to release it from the Main Base.
3. Use a metal plate or a coin to push the tenon between the Antenna body and the Base Top
to remove the Base Top.
4. Screw the Base Top to the wall.
5. Attach the Antenna Body to the Base Top.
Normal Ceiling Installation
Perform the following step to mount the Dual Band REA to a normal ceiling:
Screw the antenna directly to the ceiling through the hole on the Base; use the anchor if
necessary.
T-Bar Ceiling Installation
Perform the following steps to mount the Dual Band REA to a T-bar ceiling:
1. Detach the Antenna Body from the Main Base.
2. Remove the Metal Plate.
3. Turn over the Bottom Plate and reinstall it on the Main Base.
4. Attach the antenna to the T-Bar and adjust/swivel it to lock on the T-Bar.
Attaching Antennas to the AP
Perform the following steps to attach a Dual Band REA to the AP.
1. Press down near the center of the compartment covering and slide open the External
Antenna Access compartment on the AP.
The compartment closer to the LED panel contains the connectors.
Note:
One AP-7 model does not provide external antenna connectors.
Note:
26 Avaya Wireless AP-7 User Guide
Advertisement
Table of Contents
