802.11B/G Wireless Interface Commands; 802.11B/G Parameters - Avaya AP-7 User Manual

The Command Line Interface

802.11b/g Wireless Interface Commands

The wireless interface group parameter is wif. For Single-radio APs, the wireless interface uses
table index 3.
See Interface Configuration

802.11b/g Parameters

Table 110: 802.11b/g Parameters
Name
Wireless
Interfaces
Table Index
Network Name
(SSID)
Auto Channel
Select (ACS)
DTIM Period
RTS/CTS
Medium
Reservation
MAC Address
Closed System
Wireless Service
2
Status
Supported
Frequency
Channels
286 Avaya Wireless AP-7 User Guide
on page 62 for information on these parameters.
Type
Group
Integer
DisplayString
Integer
1
Integer
Integer
PhyAddress
Integer
Integer
Octet String
Values
N/A
3
2 – 32 characters
My Wireless Network
(default)
enable (default)
disable
1 – 255
1 = default
0 – 2347
Default is 2347 (off)
12 hex digits
enable
disable (default)
1 = resume
2= shutdown
Depends on Regulatory
Domain
Access CLI Parameter
R wif
R index
RW netname
RW autochannel
RW dtimperiod
RW medres
R macaddr
RW closedsys
RW wssstatus
R suppchannels
1 of 4