Configuring The Ap Using The Http/Https Interface - Avaya AP-7 User Manual

Performing Advanced Configuration
- Configure up to 16 VLAN and SSID pairs, and assign Security and RADIUS Profiles for
each pair.
Wireless Multimedia Extensions (WME)/Quality of Service (QoS)
•
how to configure Wireless Multimedia Enhancements/Quality of Service parameters and
QoS policies.

Configuring the AP Using the HTTP/HTTPS Interface

Follow these steps to configure an Access Point's operating settings using the HTTP/HTTPS
interface:
1. Open a Web browser on a network computer.
Note:
The HTTP interface supports the following Web browser:
Note:
- Microsoft Internet Explorer 6 with Service Pack 1 or later
- Netscape 6.1 or later
2. If necessary, disable the Internet proxy settings. For Internet Explorer users, follow these
steps:
a. Select Tools > Internet Options....
b. Click the Connections tab.
c. Click LAN Settings....
d. If necessary, clear the Use a proxy server check box.
e. Click OK twice to save your changes and return to Internet Explorer.
3. Enter the Access Point's IP address in the browser's Address field and press Enter.
Note:
The default IP address of the AP is 169.254.128.132.
Note:
Result: The Enter Network Password screen appears. See
48 Avaya Wireless AP-7 User Guide
on page 146: Describes
Figure 15.