Table of Contents
Advertisement
The Command Line Interface
Table 108: 802.11b Parameters
Name
Regulatory Domain
List
Note 1: For 802.11a APs in Europe, Auto Channel Select is a read-only parameter; it is always
enabled.
Note 2: Wireless Service Status cannot be shutdown on an interface where Rogue Scan is
enabled.
Syntax Examples
Network Name (SSID)
[Device-Name]> set wif <index 3> netname <Network Name (SSID) for wireless
interface>
[Device-Name]> show wif
For results of the show wif command, see
Operational Mode
[Device-Name]> set wif <index> mode <1,2,3, or 4. See
Table
108>
TX Power Control
[Device-Name]> set wif <interface number> currenttxpowerlevel <value>
Allowed values are: 1 (100%), 2 (50%), 3 (25%), 4 (12.5%)
For more information on the TX Power Control feature, see
page 276.
Autochannel Select (ACS)
ACS is enabled by default. Reboot after disabling or enabling ACS.
[Device-Name]> set wif <index> autochannel <enable/disable>
[Device-Name]> reboot 0
284 Avaya Wireless AP-7 User Guide
Type
Values
DisplayString
U.S./Canada -- FCC
Europe -- ETSI
Japan -- MKK
Figure
Access
R
93.
Wireless Operational Mode
TX Power Control Commands
CLI Parameter
regdomain
3 of 3
in
on
Advertisement
Table of Contents
