Tftp Commands; Tftp Server Parameters; Syntax Examples - Avaya AP-7 User Manual

TFTP Commands

TFTP Server Parameters

These parameters relate to upload and download commands.
When a user executes an upload or download command, the specified arguments are stored in
TFTP parameters for future use. If nothing is specified in the command line when issuing
subsequent upload or download commands, the stored arguments are used.
Table 104: TFTP Server Parameters
Name
TFTP
TFTP Server IP Address
TFTP File Name
TFTP File Type

Syntax Examples

Download an AP Configuration File from a TFTP Server
First start your TFTP program. It must be running and configured to transmit and receive.
[Device-Name]> set tftpfilename <file name> tftpfiletype config tftpipaddr <IP address
of your TFTP server>
[Device-Name]> show tftp (to ensure the filename, file type, and the IP address are correct)
[Device-Name]> download *
[Device-Name]> reboot 0
Type Values
Group N/A
IpAddress User Defined
DisplayString User Defined
Integer img
config
bootloader
sslcertificate
sslprivatekey
sshprivatekey
sshpublickey
clibatchfile (CLI Batch File)
cbflog (CLI Batch Error Log)
TFTP Commands
Access CLI Parameter
R tftp
RW tftpipaddr
RW tftpfilename
RW tftpfiletype
Issue 1 September 2004 275